The ARRAY SELECTION MENU displays the available drives connected to
3.
the SATA ports. Select the drives you want to include in the RAID set, then
press <SpaceBar>. When selected, the drive indicator changes from READY
to ONLIN A[X]-[Y], where X is the array number, and Y is the drive number.
LSI Logic Software RAID Configuration Utility Ver A.51 Aug 13, 2007
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Port # 0 DISK
SPACE-Sel,ENTER-EndArray,F10-Configure,F2-Drive Info,F3-Logical Drives,F4-HSP
The information of the selected hard disk drive displays at the bottom of the
screen.
4.
Select all the drives required for the RAID set, then press <Enter>.
The configurable array appears on screen.
LSI Logic Software RAID Configuration Utility Ver A.51 Aug 13, 2007
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Port # 1 DISK
SPACE-Sel,ENTER-EndArray,F10-Configure,F2-Drive Info,F3-Logical Drives,F4-HSP
ASUS DSEB-D16 Series
Easy Configuration - ARRAY SELECTION MENU
PORT #
0
READY
1
READY
77247MB
HDS728080PLA380
Easy Configuration - ARRAY SELECTION MENU
PORT #
0
ONLIN A00-00
1
ONLIN A00-01
77247MB
HDS728080PLA380
PF20A60A
PF20A60A
5-5