South Bridge Configuration; Sata Configuration - Asus SABERTOOTH 990FX GEN3 R2.0 User Manual

Power Down Enable [Disabled]
Allows you to enable or disable DDR power down mode.
Configuration options: [Enabled] [Disabled]
Memory Hole Remapping [Enabled]
Allows you to enable or disable Memory Hole Remapping function.
Configuration options: [Enabled] [Disabled]
DCT Unganged Mode [Enabled]
Allows you to select unganged DRAM mode (64-bit width).
[Enabled]: Ganged mode.
[Disabled]: Unganged mose.
Initiate Graphic Adapter [PEG/PCI]
Allows you to set which graphics controller to use as the primary boot device.
Configuration options: [PCI/PEG] [PEG/PCI]
3.5.3

South Bridge Configuration

UEFI BIOS Utility - Advanced Mode
Main
Back Advanced\
HPET
HPET [Enabled]
Allows you to enable or disable the High Precision Event Timer (HPET).
Configuration options: [Enabled] [Disabled]
3.5.4

SATA Configuration

While entering Setup, the BIOS automatically detects the presence of SATA devices. The
SATA Port items show Not Present if no SATA device is installed to the corresponding SATA
port.
UEFI BIOS Utility - Advanced Mode
Main
Back Advanced\
SATA Configuration
SATA 6G_1
SATA 6G_2
SATA 6G_3
SATA 6G_4
SATA 6G_5
SATA 6G_6
> SB SATA Configuration
3-20
Ai Tweaker
Advanced
South Bridge >
Ai Tweaker Advanced
SATA Configuration >
Monitor Boot
HPET TIMER
Enabled
Monitor Boot
(1) IDE Mode. (2) AHCI Mode. (3)
RAID Mode.
Not Present
Not Present
Not Present
Not Present
Not Present
Not Present
Chapter 3: BIOS setup
Exit
Tool
Exit
Tool