Table of Contents
Advertisement
2.4.6
Installing the MemCool FB-DIMM fan (optional)
The FB-DIMMs generate heat during continued operation. To ensure optimum
thermal condition and performance, install the optional MemCool FB-DIMM fan.
To install the optional FB-DIMM fan:
1.
Locate the three FB-DIMM fan holes
on the motherboard.
2.
Disengage the fan top cover from the
fan base. You can do this by firmly
gripping the top cover by the clamps
to release the hooks, then pull up the
top cover carefully until it separates
from the fan base.
DO NOT remove the fan from the
fan base.
3.
Position the fan base over the
DIMMs, and insert the fan base
legs into the FB-DIMM holes until
the legs are securely in place.
ASUS DSEB-D16 Series
Top cover
clamp
Top cover
hook
Fan
base
2-25
Advertisement
Table of Contents
