Table of Contents
Advertisement
5.2.8
Selecting the boot drive from a RAID set
You must have created a new RAID configuration before you can select the
boot drive from a RAID set. Refer to the Creating a RAID set: Using New
Configuration section for details.
To select the boot drive from a RAID set:
From the Management Menu, select Configure > Select Boot Drive, then
1.
press <Enter>.
LSI Logic Software RAID Configuration Utility Ver A.51 Aug 13, 2007
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Use Cursor Keys to Navigate Between Items And Press Enter To Select An Option
2.
When prompted, use the arrow keys to select the bootable logical drive from
the list, then press <Enter>.
LSI Logic Software RAID Configuration Utility Ver A.51 Aug 13, 2007
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Use Cursor Keys to Navigate Between Items And Press Enter To Select An Option
3.
The logical drive is selected as boot drive. Press any key to continue.
5-28
Configuration Menu
Easy Configuration
New Configuration
View/Add Configuration
Clear Configuration
Select Boot Drive
Select A Boot VD
Bootable VDs(1):Current Boot VD(0)
Configuration Menu
Boot Drive 0
Easy Configuration
New Configuration
View/Add Configuration
Clear Configuration
Select Boot Drive
Select A Boot VD
Chapter 5: RAID configuration
Advertisement
Table of Contents
