Asus DSEB-D16 Series User Manual page 64

12. Power supply SMBus connector (5-pin PSUSMB1)
This connector is for the power supply SMB cable, if your power supply
supports the SMBus function.
DSEB-D16 Series Power supply SMBus connector
13. SSI power connectors (24-pin ATXPWR1, 8-pin ATX12V1, 4-pin ATX12V2)
These connectors are for SSI power supply plugs. The power supply plugs
are designed to fit these connectors in only one orientation. Find the proper
orientation and push down firmly until the connectors completely fit.
•
•
•
•
DSEB-D16 Series ATX power connectors
2-44
For a fully configured system, we recommend that you use an SSI
12 V-compliant power supply unit (PSU) for LGA771-socket Intel
Dual Core processors (Bensley platform).
DO NOT forget to connect the 24+8+4-pin power plugs; otherwise, the
system will not boot up.
Use of a PSU with a higher power output is recommended when configuring
a system with more power consuming devices. The system may become
unstable or may not boot up if the power is inadequate.
You must install a PSU with a higher power rating if you intend to install
additional devices.
PSUSMB1
ATXPWR1
24-pin Power Connector
+12V DC GND
ATX12V2
4-pin
+12V DC GND
Chapter 2: Hardware information
® Xeon
ATX12V1
8-pin