Table of Contents
Advertisement
2.2.3
Support kits for the motherboard
For additional protection from motherboard breakage due to the weight of the CPU
heatsinks, your motherboard package comes with CEK springs that you can use as
weight support. Install the CEK springs before installing the motherboard.
We strongly recommend you use SSI CEB 1.1 compliant chassis. Otherwise,
the CPU cooler cannot be mounted on the chassis.
Each CEK spring has four hooks to match the
designated holes around the CPU area.
To install the CEK spring:
1.
Locate the CPU heatsink holes on
the motherboard.
2.
Position the CEK spring underneath
the motherboard, then match the
CEK spring hooks to the CPU1
heatsink holes.
2-4
Hook
Socket for CPU2
Heatsink hole
Socket for CPU1
Chapter 2: Hardware information
Advertisement
Table of Contents
