Selecting The Boot Drive From A Raid Set - Asus Z10PA-D8 Series User Manual

5.2.7

Selecting the boot drive from a RAID set

You must have created a new RAID configuration before you can select the boot drive from a
RAID set. See section 6.2.1 Creating a RAID set: Using New Configuration for details.
To select the boot drive from a RAID set
1. From the Management Menu, select Configure > Select Boot Drive, and then press
<Enter>.
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Use Cursor Keys To Navigate Between Items And Press Enter To Select An Option
2. When prompted, use the arrow keys to select the bootable virtual drive from the list,
then press <Enter>.
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Use Cursor Keys To Navigate Between Items And Press Enter To Select An Option
3. The virtual drive is selected as boot drive. Press any key to continue.
5-22
LSI Software RAID Configuration Utility Ver C.05 Sep 17,2010
BIOS Version
Configuration Menu
Easy Configuration
New Configuration
View/Add Configuration
Clear Configuration
Select Boot Drive
Select A Boot VD
LSI Software RAID Configuration Utility Ver C.05 Sep 17,2010
BIOS Version
Configuration Menu
Boot Drive 0
Easy Configuration
New Configuration
View/Add Configuration
Clear Configuration
Select Boot Drive
Select A Boot VD
A.10.09231523R
A.10.09231523R
Bootable VDs(1): Current Boot VD(0)
Chapter 5: RAID configuration