5.2.8.
Selecting.the.boot.drive.from.a.RAID.set
�ou must have created a new RAID configuration before you can select the boot
drive from a RAID set. Refer to the Creating a RAID set: Using New Configuration
section for details.
To select the boot drive from a RAID set:
From the Management.Menu, select Configure > Select.Boot.Drive, then
1.
press <Enter>.
2.
When prompted, use the arrow keys to select the bootable logical drive from
the list, then press <Enter>.
3.
The logical drive is selected as boot drive. Press any key to continue.
5-28
Chapter 5: RAID configuration