Chapter 5 Fabric Watch Configuration; In This Chapter; Fabric Watch Configuration Tasks; Table 2 Fabric Watch Configuration Tasks - Brocade Communications Systems 8 Administrator's Manual

Fabric Watch Configuration

In this chapter

Fabric Watch configuration tasks

Table 2
For complete information about any of these commands, refer to the Fabric OS Command
Reference Manual.
TABLE 2
Configuration task
Initialize all Fabric Watch classes
Set the boundary and alarm level to
custom or default.
Note: These command resets all
thresholds for all classes and cannot be
configured on individual ports.
Configures Fabric Watch e-mail alerts for
all classes.
Configures and shows alarms filtering for
Fabric Watch for all classes.
Set the following parameters for SFP,
Fabric, Security, and Performance
monitoring:
•
•
•
•
•
•
•
•
Fabric Watch configuration tasks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
•
Setting Fabric Watch custom and default values . . . . . . . . . . . . . . . . . . . . . 35
•
E-mail notification configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
•
Notification configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
lists the Fabric Watch commands you can use to create custom threshold configurations.
Fabric Watch configuration tasks
Class
Area type
Time base
Threshold level
Trigger (boundary level)
Action (notification type)
Buffer
Command
fwClassInit
fwSetToCustom
fwSetToDefault
fwMailCfg
fwAlarmsFilterSet
fwAlarmsFilterShow
thConfig
Location of procedure
"Activating Fabric Watch using a
Telnet session" on page 27.
"Setting Fabric Watch custom and
default values" on page 35.
"E-mail notification configuration"
page 35.
"Configuring alarm notifications"
page 39.
Chapter 6, "Fabric, Security, SFP, and
Performance Monitoring".
Chapter
5
on
on
33