Table of Contents
Advertisement
About the TouchCenter (cont'd)
TouchCenter "Arming" Screen
From the "Home" screen, press SECURITY to access the TouchCenter
"Arming" screen. Use this picture and the table that follows to
become familiar with the TouchCenter security functions.
Note: The Voice Status Icon (
indicates that the TouchCenter is a
causes the TouchCenter to announce system status if pressed at least
10 seconds following its last press. Note that Voice must be enabled
(by the installer) for this button to function correctly during an alarm
condition.
ITEM
AWAY
Press this button to arm when no one will be staying on the
premises. When armed in AWAY, the system will sound an
alarm if a protected door or window is opened, or if any
movement is detected inside the premises. You may leave
through the entrance door during the exit delay period without
causing an alarm. You may also re-enter through the entrance
door, but must disarm the system with your User Code within the
entry delay period or an alarm will occur.
STAY
Press this button to arm when you are staying home, but might
expect someone to use the entrance door later.
When armed in STAY, the system will sound an alarm if a
protected door or window is opened, but you may otherwise move
freely throughout the premises. Late arrivals can enter through
the entrance door without causing an alarm, but they must disarm
the system within the entry delay period or an alarm will occur.
NOTE (6271V and 6271CV only): On some residential systems, if
you press the Voice Status Icon while armed in the Stay Mode,
the exit delay time will restart (if the feature was enabled by your
installer).
8
) shown in the above illustration
6271CV. This button
6271V or
FUNCTION
Advertisement
Table of Contents
