Touchcenter "Arming" Screen - Honeywell 6271C - Ademco TouchCenter Color Keypad User Manual

TouchCenter "Arming" Screen

From the "Home" screen, press SECURITY to access the TouchCenter
"Arming" screen. Use this picture and the table that follows to
become familiar with the TouchCenter security functions.
Note: The Voice Status Icon (
indicates that the TouchCenter is a 6271CV. This button causes the
TouchCenter to announce system status if depressed at least 10
seconds following its last depression. Note that Voice must be enabled
for this button to function correctly during an alarm condition.
ITEM
AWAY Press this button to arm when no one will be staying on the
premises. When armed in AWAY, the system will sound an
alarm if a protected door or window is opened, or if any
movement is detected inside the premises. You may leave
through the entrance door during the exit delay period without
causing an alarm. You may also re-enter through the entrance
door, but must disarm the system with your User Code within the
entry delay period or an alarm will occur.
STAY Press this button to arm when you are staying home, but might
expect someone to use the entrance door later.
When armed in STAY, the system will sound an alarm if a
protected door or window is opened, but you may otherwise move
freely throughout the premises. Late arrivals can enter through
the entrance door without causing an alarm, but they must disarm
the system within the entry delay period or an alarm will occur.
NOTE (6271CV only): On some residential systems, if you press
the Voice Status Icon while armed in the Stay Mode, the exit
delay time will restart (if the feature was enabled by your
installer).
About the TouchCenter (Cont'd)
) shown in the above illustration
FUNCTION
7