ROSE DISPLAYS ECONOSTAND WITH ANOGOTCHA Instruction Sheet

EconoStand™

Parts

AnoGotcha Shell
12AG400

Instructions for Assembly

Step 1

Assemble bottom holder bracket
onto lower pole section (this is the
thicker section of pole).

Step 2

Screw pole onto baseplate.
Tighten securely.

Step 3

Place stand upright. Using
thumbscrew at top of pole, attach
top holder bracket onto pole top.

Step 4

Insert T-Top Gotcha Holder into
the AnoGotcha Shell.

Step 5

Slide AnoGotcha onto brackets.

Step 6

Install end caps after assembly
to brackets.
®
The Gotcha is a registered trademark and EconoStand
are tradmarks of Rose Displays, Ltd. Neither the manufacturer nor any sales
agent may be held liable for injury, loss or damage resulting from the use of
these products. Part #02INSEcono/AnoGotcha
Incept- 9.10.02
Instruction Sheet
T-Top Gotcha
1
3
5
TM
and AnoGotcha™
EconoStand
components
Pole
Bottom
Holder Bracket
Base Plate
Holder Bracket
2
4
6
Continued on next page
35 Congress Street, Salem, MA 01970
Tel# 1- 800 631-9707 Fax# 1-800-560-2890
e-mail:signware@rosedisplays.com
Top
Thumb
Screw
Top