ROSE DISPLAYS ECONOSTAND WITH SUPERSNAP Instruction Sheet

EconoStand

Parts

End Caps
06-5475

Instructions For Assembly

Step 1

Assemble bottom holder bracket onto
lower pole section (this is the thicker
section of the pole).

Step 2

Screw pole onto baseplate. Tighten
securely.

Step 3

Place stand upright. Using thumbscrew
at top of pole, attach top holder
bracket onto pole top.

Step 4

Slide SuperSnap Holder onto brackets.

Step 5

Snap open the SuperSnap holder and
insert your graphic (top and bottom).
To close, snap the SuperSnap shut.
Push endcaps into place.

Step 6

Adjust height of stand as necessary.
The SuperSnap and EconoStand are trademarks of Rose Displays, Ltd.
Neither the manufacturer nor any sales agent may be held liable for
injury, loss or damage resulting from the use of these products. Part
#02INSEcono/SuperSnap
Inception 1.29.02
™
Instruction Sheet
EconoStand
components
SuperSnap
12S300
1
3
5
97-0200
Pole
Bottom
Holder Bracket
Thumb
Base Plate
Top
Holder Bracket
2
2a
4
6
35 Congress Street, Salem, MA 01970
Tel# 1- 800 631-9707 Fax# 1-800-560-2890
e-mail:signware@rosedisplays.com
Top
Screw