ROSE DISPLAYS ECONOFRAME WITH CABLE CLIP AND CABLE AND SAUCER Instruction Sheet

EconoFrame

Parts

Cable Clip
06-5050

Instructions for Hanging

Instructions for Hanging

Step 1

Insert corner brackets into split
rails and into rail opposite split
rail. Split rail side is made up of
two separate pieces. Fig. 1
Note: Corner bracket tension
tabs must face toward inside
of frame.

Step 2

Place cable into inner channel of
CableClip. The cable should snap
into place. Fig. 2

Step 3

Align one end of the CableClip
with the top channel of the frame.
Then insert one round end, press
down on the other round end
and slide CableClip into rail.
Fig. 3 Repeat steps 2 & 3 for
second CableClip.

Step 4

Assemble frame following steps in.
Fig. 4 sliding sides together in the
order shown.

Step 5

Insert poster. Fig 5.
The EconoFrame™ is a trademark of Rose Displays, Ltd. Neither the
manufacturer nor any sales agent may be held liable for injury, loss or
damage resulting from the use of these products.
Part #02INSEconoFCCSaucer
Incept-11.13.02
TM
Instruction Sheet
EconoFrame rails
Corner
brackets
EconoFrame
12EF-100 split rails
Figure 1
Figure 2
solid rail w/
4
3
solid rail
Figure 4
Cable and
Saucer
16-0018SS
1
Figure 3
Figure 5
35 Congress Street, Salem, MA 01970
Tel# 1- 800 631-9707 Fax# 1-800-560-2890
e-mail:signware@rosedisplays.com
2