ROSE DISPLAYS ECONOSTAND WITH ANOMULTI Instruction Sheet

EconoStand

Parts

End Caps
06-5525

Instructions For Assembly

Step 1

Assemble bottom holder bracket onto
lower pole section (this is the thicker
section of the pole).

Step 2

Screw pole onto baseplate. Tighten
securely.

Step 3

Place stand upright. Using thumbscrew
at top of pole, attach top holder
bracket onto pole top.

Step 4

Insert the poster into the Slim Holder
by either sliding the poster into the
holder or tapping the holder onto the
poster. . Fig. 1 Slide Slim Holder into
AnoMulti Holder. Fig.2

Step 5

Slide AnoMulti Holder onto brackets.
Install endcaps after assembly to
brackets.

Step 6

Adjust height of stand as necessary.
The Slim AnoMulti and EconoStand are trademarks of Rose Displays,
,
Ltd. Neither the manufacturer nor any sales agent may be held liable for
injury, loss or damage resulting from the use of these products.
Part #02INSEcono/AnoMulti
Inception 9.10.02
™
Instruction Sheet
EconoStand
components
AnoMulti
12AM300
1
3
5
Pole
Bottom
Holder Bracket
Base Plate
Top
Holder Bracket
2
2a
4
Fig. 1
Fig. 2
6
35 Congress Street, Salem MA 01970
Tel# 1-800-631-9707 Fax# 1-800-560-2890
e-mail:signware@rosedisplays.com
Top
Thumb
Screw