ROSE DISPLAYS ECONOSTAND WITH ANOFRAME Manual

EconoStand™ with AnoFrame™

Parts

Finished look

Instructions for Assembly

Step 1

Assemble frame except for split rails.
Insert corner brackets into AnoFrame
sides. Fig. 1
Note: Assembly brackets
tension tabs face towards outside
of frames. Split rail side is made
up of 2 separate pieces.

Step 2

Insert corner brackets into split
rails and into rail opposite split
rail as shown in Fig. 2 . Assemble
frame following diagram steps
1 thru 3, sliding sides together
in the order shown.
The AnoFrame and EconoStand are trademarks of Rose Displays, Ltd.
Neither the manufacturer nor any sales agent may be held liable for
injury, loss or damage resulting from the use of these products.
Part #02INSEcono/AnoFrame
Incept-9.10.02
Corner
brackets
1
2
1
* Assemble frame
except for split rails.
Instruction Sheet
AnoFrame rails AnoFrame
12AF100 split rails
solid rail
2
3
solid rail
(continued on other page)
35 Congress Street, Salem, MA 01970
Tel# 1- 800 631-9707 Fax# 1-800-560-2890
e-mail:signware@rosedisplays.com
Page 1