Kodak I620 - Document Scanner User Manual page 54

A-61500 May 2010
12. Align the tabs on the upper housing with the slots on the lower
housing.
13. Press the upper and lower housings together until they snap into
place.
14. Reinstall the feed module by aligning the pins, fitting it into position
and pulling up on the release lever to lock it into place. Verify that
the feed module is securely in place and moves freely after you
install it.
15. Close the pod.
16. Close the printer access cover.
17. Reinstall the output tray.
Locking tab
Slot
Align
these
areas
5-15