Replacing The Blotter Strips - Kodak I620 - Document Scanner User Manual

Replacing the blotter
strips
4-6
Blotter strips collect ink overflow. They should be replaced when there
is a build-up of ink. Replacement blotter strips may be purchased
through your supplier.
1. Open the pod.
2. Locate the two ink blotter strips.
3. Carefully pull the blotter strip(s) off the transport. You can replace
one or both of the strips as necessary.
4. Discard the soiled strip(s)
5. Peel the backing away from a new blotter strip.
Ink blotter strips
A-61500 May 2010