Configuring The Eye-Fi Card Settings; Private Wireless Network - Xerox XCARD-SCAN User Manual

Configuring the Eye-Fi Card Settings

This section describes configuring the Eye-Fi card settings for scanning and wireless transfer of images. For any
options not described here-in, clicking on the help button in the Eye-Fi center window will open the online help site
for the Eye-Fi Center application.
While configuring the settings as described in the following sections, please start here:
1. With the Eye-Fi card in the scanner, connect it to the computer and then turn it on.
2. Open the Eye-Fi Center software and log in.
3. Click on the gear icon next to the Eye-Fi card to open the settings window.
Note: if the scanner powers off while configuring the Eye-Fi card settings, simply turn the scanner back on to
continue.
Important: when you are finished configuring these settings, close the configuration window and then click the
Eject icon next to the Eye-Fi card in the main Eye-Fi Center application.

Private Wireless Network

A private network was likely specified when the Eye-Fi software was installed on the computer. You have the option
to add, change, or remove a wireless network. This procedure outlines how to add or change it.
Click the Networks tab, then the Private Networks tab. The network currently used to transfer images displays
1.
in the lower part of the window.
2. A notification in the window indicates if a WAP has been detected by the Eye-Fi card. Click on the drop menu
arrow and select a wireless network from the list. Available wireless networks display automatically.
To refresh the list select Refresh Network List. To add a network, select Other network.
3. Input the network password and fill in any other fields required to access the network.
4. Click the Add network to card button to use the wireless network.
36 Xerox Mobile Scanner
User's Guide