Create Account And Log In - Xerox XCARD-SCAN User Manual

Create Account and Log In

With launch of the Eye-Fi software or application, a window displays to create an account and/or log in. If this is
your first time using Eye-Fi, you need to create an account. A valid Email address is required for registering,
activating, and using the Eye-Fi card.
Note: If the scanner times out during the registration process, turn it on again by pressing the power button until a
light flashes.
Follow these instructions to create an account and prepare the Eye-Fi center for first time
use:
The Eye-Fi card must be connected to the computer for you to configure the image transfer settings. You can leave
the Eye-Fi card in the scanner while connected to the computer, or insert the Eye-Fi card directly into any SDHC
memory card reader in your computer.
1. Launch the Eye-Fi Center application as follows.
Windows users—open Start > Eye-Fi > Eye-Fi Center.
Mac users—open the Applications folder, access the Eye-Fi folder, then Eye-Fi Center.
2. If the create account window appears (shown below left), type an email address, enter a password, and click
the appropriate button. This creates an Eye-Fi user account.
If a login window appears (shown below right), enter an existing Eye-Fi email address and password, then click
the appropriate button.
3. If prompted to update the firmware on the card, do so by clicking the Update button.
4. If you created an account, an email is sent to you. Click the link in the email to verify the account. A welcome
email is then sent to you.
5. Specify if you want the images to be transferred to your computer or to another device. In the example shown
here, because we are working on the computer and want to have the images transferred to that computer, we
select that option. To have the images also transferred to your Eye-Fi account so that they are accessible from
the Eye-Fi web site, leave that check box enabled.
34 Xerox Mobile Scanner
User's Guide