Insert The Battery - Xerox XCARD-SCAN User Manual

Mobile scanner

Hide thumbs Also See for XCARD-SCAN:

Table of Contents

Insert the Battery

The battery comes pre-installed in the scanner's battery compartment. Open the battery compartment, on the

underside of the scanner, and pull out the Mylar strip. Close the battery compartment and proceed with charging

the scanner.

If the battery is not pre-installed in your unit, or if you need to replace the battery for any reason, please follow these

instructions for installing the battery.

Warning: Only use the battery model provided with the scanner (NP120 for 3.7V 1700mAh).

Open the battery cover on the underside of the scanner.

Insert the battery into the compartment. Make sure the battery is inserted in the correct position.

Lower the compartment lid and slide the lid in place to lock it.

Xerox Mobile Scanner

User's Guide

Table of Contents