Scanning With The Isis Interface; Accessing The Isis Interface In Quickscan - Xerox 90-8010-200 - DocuMate 250 User Manual

Scanning with the ISIS Interface

Accessing the ISIS interface in QuickScan

66
Scanning with the ISIS
Interface
You can use the ISIS interface from QuickScan or any other application
that will access the ISIS driver. Note that the ISIS interface for each
application varies depending on the application. Please refer to that
software application's User Guide for instructions on scanning with the
ISIS interface. The QuickScan User's Guide is available on the Disc 1 CD
that you received with the scanner.
Open the QuickScan software to access the ISIS driver scanning options.
Please note that you may see the following warning message:
1. Please disregard this message and click Continue.
The Pixel Translations ISIS drivers were installed correctly during the
installation of your Xerox DocuMate 250 scanner.
The Scanner Selection dialog box will then open.
2. Select Xerox DocuMate 250 from the list of scanners and click OK.
Your scanner is then ready to work with the QuickScan ISIS driver.
DocuMate 250 Scanner User's Guide