Installation; Before You Begin - Xerox 90-8010-200 - DocuMate 250 User Manual

Installation

Before You Begin

4
Installation
Installation is a quick, four-step process:
1. Assemble the scanner
2. Install the software
3. Connect the power supply
4. Connect the USB cable and turn on the power
Please make sure of the following before you begin installation:
• The information in this guide may cover software not provided
with the scanner you purchased. Disregard any information
about the software not applicable to your chosen product.
Please visit our web site at www.xeroxscanners.com for the
latest software updates for your Xerox DocuMate 250 scanner.
• If your computer has AntiVirus or AntiSpyware software running,
you may see messages during installation asking you to allow
the installation to proceed. Although the messages will differ
based on the software your computer is running, in each case
you should allow the installation to proceed. Alternatively, you
can turn off the AntiVirus or AntiSpyware software before
installing your scanner. But if you do, make sure to turn it back
on again when installation is finished.
• If you already have a scanner connected to your computer, you
may need to remove its driver programs to properly install and
operate your Xerox DocuMate 250 scanner. Please see
"Troubleshooting" on page 70 for more information, and
"Uninstalling Your Scanner" on page 73 for basic instructions to
uninstall driver programs. Also see the User's Guide that you
received with your other scanner for specific instructions.
• If your computer is running Windows Vista, you may see the
Vista User Account Control screen asking you to confirm system
changes. Click the continue button to allow the installation to
proceed.
DocuMate 250 Scanner User's Guide