Scanning With The Isis Interface; Accessing The Isis Interface In Quickscan - Xerox DocuMate 162 User Manual

Xerox documate 162: user guide

Hide thumbs Also See for DocuMate 162:

Table of Contents

Scanning with the ISIS Interface

Scanning with the ISIS

Interface

You can use the ISIS interface from QuickScan™ or any other application

that will access the ISIS driver. Note that the ISIS interface for each

application varies depending on the application. Please refer to that

software application's User Guide for instructions on scanning with the

ISIS interface.

1. Open the QuickScan software to access the ISIS driver scanning

options.

Please note that you may see the following warning message:

2. Please disregard this message and click Continue.

The ISIS drivers were installed correctly during the installation of your

Xerox DocuMate 162 scanner.

3. The Scanner Selection dialog box will then open.

4. Select Xerox DocuMate 162 from the list of scanners and click OK.

5. Your scanner is now ready to work with QuickScan.

DocuMate 162 Scanner User's Guide

Table of Contents