Scanning With The Isis Interface; Accessing The Isis Interface In Quickscan - Xerox DocuMate 262 User Manual

Accessing the ISIS interface in QuickScan

DocuMate 262 Scanner User's Guide
Scanning with the ISIS
Interface
You can use the ISIS interface from QuickScan or any other
application that will access the ISIS driver. Note that the ISIS
interface for each application varies depending on the application.
Please refer to that software application's User Guide for
instructions on scanning with the ISIS interface. The QuickScan
User's Guide is available on the Disc 1 CD that you received with
the scanner.
Open the QuickScan software to access the ISIS driver scanning
options. Please note that you may see the following warning
message:
1. Please disregard this message and click Continue.
The Pixel Translations ISIS drivers were installed correctly
during the installation of your Xerox DocuMate 262 scanner.
The Scanner Selection dialog box will then open.
2. Select Xerox DocuMate 262 from the list of scanners and click
OK.
Your scanner is then ready to work with the QuickScan ISIS
driver.

Scanning with the ISIS Interface

99