Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Milesight AM107
Summarization of Contents
1. Product Introduction
1.1 Overview
Introduces the AM100 series as a compact indoor ambiance monitoring sensor.
1.2 Features
Lists key features of the AM100 series sensors.
2. Hardware Introduction
2.1 Packing List
Details the items included in the AM100 series package.
2.2 Hardware Overview
Provides a visual overview of the AM100 series hardware components.
2.3 E-link Screen
Describes the E-link screen functionality and display modes.
2.3.2 Screen Mode Switch
Explains methods to switch between different display modes of the E-link screen.
2.4 Power Button
Details the functions and actions of the power button.
2.5 Dimensions(mm)
Shows the physical dimensions of the AM100 series device.
4. Operation Guide
4.1 Log in the ToolBox
Guides on accessing and logging into the Milesight ToolBox for configuration.
4.1.1 NFC Configuration
Steps for configuring the device using NFC and a smartphone.
4.1.2 USB Configuration
Steps for configuring the device using a USB cable and PC.
4.2 LoRaWAN Settings
Configures transmission parameters for the LoRaWAN network.
4.3 Time Synchronization
Guides on synchronizing the device's time via mobile app or software.
4.4 Basic Settings
Covers basic configurations like reporting interval and screen display mode.
4.5 Advanced Settings
Details advanced configuration options for the device.
4.5.1 Data Collection Settings
Selects which sensor data to monitor and report.
4.5.2 Calibration Settings
Details how to calibrate sensor values for accuracy.
4.5.3 Threshold Settings
Sets thresholds for triggering alarms for CO2 and TVOC.
4.6 Maintenance
Covers procedures for maintaining the device's functionality.
4.6.1 Upgrade
Instructions for upgrading the device firmware locally or over the air.
4.6.2 Backup
Explains how to back up and restore device configurations.
4.6.3 Reset to Factory Default
Provides methods to reset the device to its factory settings.
5. Installation
5.1 Installation Note
Guidelines for optimal placement and mounting of the AM100 series.
5.2 Wall Mounting
Step-by-step instructions for mounting the device on a wall.
6. Milesight IoT Cloud Management
6.1 Add a Milesight Gateway
Steps to enable and configure a Milesight gateway for cloud management.
6.2 Add AM104/AM107 to Milesight IoT Cloud
Instructions for adding AM104/AM107 devices to the Milesight IoT Cloud platform.
7. Device Payload
7.1 Basic Information
Details the basic information reported by sensors when joining the network.
7.2 Sensor Data
Explains the sensor data reported by AM100 series at intervals.
7.3 Downlink Commands
Lists downlink commands for configuring device settings.
Appendix: CO2 Guidelines
Carbon Dioxide Levels and Safety
Provides information on CO2 levels and their health implications.
Need help?
Do you have a question about the AM107 and is the answer not in the manual?
Questions and answers