Heta Scan-line 100 Series Operating And Installation Instructions

Heta Scan-line 100 Series Operating And Installation Instructions

Advertisement

oPeratinG anD installation
instrUCtions
sCan-line 95-100 series
eCoDesiGn reaDy
www.heta.dk
en
Danish DesiGn . Danish QUality . Danish ProDUCtion
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Scan-line 100 Series and is the answer not in the manual?

Questions and answers

Summarization of Contents

Transportation Safety Devise
Screw Removal for Pedestal Stoves
Warning regarding a specific screw on pedestal-mounted stoves needing removal before use.
Installation Instructions
Safety Clearances and Distances
Adhering to national and local regulations for installation safety clearances.
Floor Requirements
Ensuring the floor surface is non-flammable and can bear the stove's weight.
Chimney Connection Guidelines
Connecting the stove to brick or steel chimneys following regulations.
Draft Conditions and Airflow
Understanding and ensuring proper chimney draft for efficient combustion.
Instructions for Use
First Firing Procedures
Initial firing to cure the stove paint and avoid unpleasant odors.
Fuel Selection and Preparation
Guidance on approved wood types, moisture content, and storage.
Wood Heating Value and CO2 Impact
Information on wood's heating efficiency and environmental benefits.
Operating the Stove
Chimney Fire Procedures
Actions to take in case of a chimney fire, including shutting off air.
Adjusting Combustion Airflow
How to control the fire intensity using the airflow adjustment handle.
Lighting and Fueling the Stove
Step-by-step guide for lighting the stove and adding fuel.
Reduced Output Operation
Tips for operating the stove at a lower output efficiently.
Optimal Firing and Safety
Achieving Optimal Firing
Using air supply correctly for high effect and clean glass.
Explosion Risk and Prevention
Warnings about potential explosion risks and safe operation.
Maintenance and Components
Vermiculite Stone Replacement
Step-by-step guide for removing and replacing vermiculite stones.
Rear Stone Assembly
Description of the rear stone structure in Scan-Line 100 and 95.
External Fresh Air Accessory
Pedestal Model Accessories
List of accessories available for pedestal-mounted stove models.
Non-Pedestal Model Accessories
List of accessories available for stoves without a pedestal.
Connecting External Fresh Air Supply
From Below Installation
Instructions for connecting external fresh air supply from the bottom.
Operational Problems and Maintenance
Troubleshooting Chimney Issues
Addressing common operational problems related to chimney draft and blockages.
Stove Maintenance
Guidance on cleaning and maintaining the stove's heat-resistant paint finish.
Cleaning the Glass
Effective methods for removing soot from the viewing window.
Ventilation and Guarantee
Ventilation Requirements
Adequate ventilation requirements according to building regulations.
Special Conditions for Non-Pedestal Models
Specific installation distances for Scan-Line 95/100 without pedestal.
Product Guarantee Details
Information on the five-year guarantee and exclusions.
Appendix A: Smoke Control Areas
Clean Air Act Regulations
Information on smoke control areas and authorized fuels/appliances.

Table of Contents