Related Manuals for AUMA SG 10.1
Summarization of Contents
Electrical Connections
Terminal Access
Steps to access the terminal compartment for wiring.
Wiring Connections
Connecting motor and control wires according to the diagram.
Test Run
Operating Direction for Test Knobs
Using test knobs to manually operate limit and torque switches.
Setting of Limit Switching
Setting the Closed Limit Switch (LSC)
Procedure to set the closed limit switch for the actuator.
Setting Mechanical Stops
Setting the Closed End Stop
Adjusting the mechanical stop for the closed position.
Setting the Open End Stop
Adjusting the mechanical stop for the open position.
Optional Equipment
Setting Limit Switch LSA
Setting the LSA limit switch for mid-position control signaling.
Setting Limit Switch LSB
Setting the LSB limit switch for mid-position control signaling.
Potentiometer Zero Adjustment
Adjusting the potentiometer to zero in the closed position.
Current Transmitter Adjustment
Adjusting current transmitter zero and maximum values.
Need help?
Do you have a question about the SG 10.1 and is the answer not in the manual?
Questions and answers