Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Norton Clipper TR 232 L
Summarization of Contents
Basic Safety Instructions
Symbols
Explains the meaning of various warning and informational symbols used on the machine for safe operation.
Machine Plate Details
Details the information found on the machine's identification plate, including model, serial number, and specifications.
Safety Instructions for Operating Phases
Provides crucial safety guidelines to follow before and during specific operational tasks and procedures.
Machine Description
Short Description
Offers a brief overview of the TR 232 Saw, highlighting its design for durability and performance.
Purpose of Use
Clarifies the intended applications of the machine, specifying materials it is designed for and those it is not.
Layout and Components
Illustrates and identifies the main components and parts of the TR 232 Saw for user familiarization.
Technical Data
Presents detailed technical specifications and performance data for different models of the TR 232 Saw.
Vibration Emission Statement
Declares the measured vibration emission levels of the machine according to relevant European standards.
Noise Emission Statement
States the declared noise emission levels (sound pressure and power) for the machine as per EN standards.
Assembly and Commissioning
Assembly of the Legs
Step-by-step instructions for unfolding and assembling the machine's supporting legs and securing them.
Assembly of the Handles
Guides on how to attach the machine's handles for easier handling and maneuvering.
Cutting Head Assembly
Instructions for fixing the handle of the cutting head and releasing it from its transport position.
Cooling System Assembly
Details on how to install the water pipe and mount the water pump for the cooling system.
Transport Wheels Installation
Instructions for attaching the transport wheels to the machine's feet for mobility.
Longitudinal Guide Assembly
Steps for assembling the longitudinal guide, including inserting shafts and securing supports.
Side Extension Assembly
Instructions on how to assemble and lock the side extension for the machine.
Handle for Cut in Angle Installation
Guides on installing the handle for performing cuts at various angles on the machine.
Material Holding System Installation (TR 232 L)
Describes how to install the material holding system, specifically for the TR 232 L model.
Tool Assembly (Blade Mounting)
Step-by-step guide for safely mounting a new blade onto the machine's shaft.
Electrical Connections
Instructions on verifying voltage supply and ensuring secure electrical connections for operation.
Water Cooling System Operation
Details on filling the water tray, ensuring water supply to the blade, and pump maintenance.
Starting the Machine
Explains how to connect the machine to power and use the start/stop buttons for operation.
Transport and Storing
Securing for Transport
Provides instructions on how to secure the machine for safe transportation, including blade removal and head locking.
Storing the Machine
Outlines the measures to take when storing the machine for extended periods, focusing on cleaning and protection.
Operating the Machine
Site of Work Preparation
Advises on selecting a suitable working location, ensuring safety, adequate lighting, and clear space.
Cutting Procedure
Explains the correct technique for using the TR 232 Saw for cutting materials safely and effectively.
Cutting with an Angle
Details the procedure for tilting the cutting head to perform cuts at various angles between 0° and 45°.
Faults: Causes and Cures
Fault-Finding Procedures
General advice on how to proceed when a fault occurs, emphasizing electrical safety.
Trouble-shooting Guide
A table listing common machine problems, their possible causes, and recommended resolutions.
Circuit Diagram
Provides a visual representation of the machine's electrical circuit for diagnostic purposes.
Customer Service and Support
Information on how to order spare parts, warranty claims, and contact details for support.
Need help?
Do you have a question about the Clipper TR 232 L and is the answer not in the manual?
Questions and answers