Installation To Extension Column - Epson ELPMBPJF - Universal Projector Ceiling Mount Installation And Assembly Manual

Installation to Extension Column

1
Screw extension column (sold separately) to ceiling plate (G). Align the notch with one of the four holes in the ceiling
plate (G) and secure extension column with a M5 x 10 mm socket pin screw (C) using security allen wrench (B).
See detail 1.
Screw extension column connector (I) to extension column. Align slot in extension column with one of the top holes
in extension column connector (I). Insert and tighten one #10-32 x 3/8" socket pin screw (J) through extension
column connector (I) into slot on extension column using security allen wrench (B). See detail 2.
Screw projector mount (A) into extension column connector (I). Align slot in projector mount (A) to one of the bottom
holes in extension column connector (I). Insert and tighten one #10-32 x 3/8" socket pin screw (J) through extension
column connector into slot in projector mount (A) using security allen wrench (B). See
detail 3.
*
NOTE: Slotted set screws (K) are used to jam against the threads of each connecting joint to prevent any excess
movement. Do not overtighten screws; overtightening screws will damage threads making it difficult to separate the
products.
Skip to step 2.
UL Listed ELPMBP01, ELPMBP02, ELPMBP03 or
UL Listed CMJ and ACC Series Ceiling Mounts
(Sold Separately).
EXTENSION COLUMN
(UL Listed ELPMBC01,
EXT or ADJ Series)
(Sold Separately)
Visit the Peerless Web Site at www.peerlessmounts.com
G
I
SLOT
A
For Technical Support Contact Peerless Mounts at 1-800-729-0307 or 708-865-8870.
C
EXTENSION
COLUMN
EXTENSION
COLUMN
K
4 of 10
G
DETAIL 1
I
DETAIL 2
EXTENSION
I
COLUMN
K
DETAIL 3
ISSUED: 01-23-07 SHEET #:055-9498-2 05-29-08
K*
SLOT
J
SLOT
J
A