Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Teledyne CP031A
Summarization of Contents
Safety Instructions
Symbols
Describes safety symbols used on the probe and in documentation.
Precautions
General safety guidelines and warnings for using the probe to prevent injury or damage.
Specifications
Warranted Characteristics
Details the guaranteed accuracy and bandwidth specifications for the probes.
Nominal Characteristics
Lists key operational characteristics like current ratings, sensitivity, and load.
Typical Characteristics
Presents typical performance metrics such as output voltage, noise, and rise time.
Environmental Characteristics
Outlines the operating and storage conditions, including temperature, humidity, and altitude.
Physical Characteristics
Describes the physical dimensions of the probe head and maximum conductor size.
Derating Curves and Impedance
CP030/CP030A Derating Curve - Maximum Input Current vs. Frequency
Graph showing maximum input current limits for CP030/CP030A probes based on frequency.
CP030/CP030A Insertion Impedance vs. Frequency
Graph illustrating insertion impedance for CP030/CP030A probes across frequencies.
CP031/CP031A Derating Curve - Maximum Input Current vs. Frequency
Graph showing maximum input current limits for CP031/CP031A probes based on frequency.
CP031/CP031A Insertion Impedance vs. Frequency
Graph illustrating insertion impedance for CP031/CP031A probes across frequencies.
Operation
Precautions
Safety and operational warnings for using the probe to prevent injury or damage.
Connecting to the Test Instrument
Details connecting the probe to the oscilloscope via the ProBus interface.
Connecting to the Test Circuit
Instructions on how to physically attach the probe to a conductor.
Operating with an Oscilloscope
Explains how probe settings and measurements interact with the oscilloscope interface.
Probe A/div and Attenuation
Describes how Volts/div controls scale factor and probe attenuation.
Bandwidth Limit
Explains the function and control of the probe's bandwidth limit.
AC Coupling
Explains using AC coupling to isolate DC components and its limitations.
Auto Zero
Describes the Auto Zero function for DC offset correction.
Degauss
Explains the procedure for demagnetizing the probe core.
Performance Verification
Test Equipment Required
Lists equipment needed for performance verification.
Preliminary Procedure
Outlines initial steps before performing the verification.
Functional Check
Describes a basic operational check to ensure probe functionality.
Check LF Accuracy
Details the setup for verifying the probe's low-frequency accuracy.
Performance Verification Test Record
Explains how to record the results of the performance verification procedure.
CP03x Test Record
Provides the template for recording test data and results for the probe.
Care and Maintenance
Cleaning
Instructions for cleaning the exterior of the probe and cable.
Calibration Interval
Recommends a one-year calibration interval and specifies adjustment procedures.
Service Strategy
Explains the process for handling defective probes, including exchange and fees.
Troubleshooting
Lists common operational issues and provides steps for resolving them.
Certifications
EMC Compliance
Details the electromagnetic compatibility standards (EC Directive 2014/30/EU) met by the probes.
Safety Compliance
Outlines compliance with low voltage and product safety directives (EC Directive 2014/35/EU).
Environmental Compliance
End-Of-Life Handling
Information regarding Waste Electrical and Electronic Equipment (WEEE) disposal.
Restriction of Hazardous Substances (RoHS)
States the product's conformance to the RoHS2 Directive.
Need help?
Do you have a question about the CP031A and is the answer not in the manual?
Questions and answers