Copy Log File To Usb Flash Drive - Brother GT-341 Instruction Manual

7-2-13. Copy Log file to USB flash drive

You may be asked from the technical support to get the log data of the GT-3 for troubleshooting. Insert the USB flash diver to
save the log data into the file (*.zlg or *.log).
(1) Insert the USB flash drive into the Slot in front of the Operation Panel.
(2) Press either one of the Up / Down / Back / OK Button to enter the menu.
(3) Select [ Maintenance ] > [ Log Copy to USB ] with the Up / Down Button and press the OK Button. The following message
will be indicated.
(4) The log data is being saved to the USB flash drive while the Print Button is blinking. Wait for a while after the Print Button
stops blinking and the printer bells.
(5) Make a copy of the log file saved in the USB flash drive and send it to the technical service.
<Note>
Do not touch the USB flash drive while the Print Button is flashing; it may destroy the saved data.
GT-3 Series
7. Troubleshooting
16e0041Y
127