Brother GT-341 Instruction Manual page 47

<Important!>
The platen size may become 14x16 inches when pressing Set From Printer, even after setting the size of 10x12 inches at
"Document Properties" dialog box of Printer Driver. To make print data in platen size of 10x12 inches, set Width : 254 mm
(10 inch), Height : 304.8 mm (12 inch).
If the print data file is not saved from the printer driver menu but application menu, the extension of the print data is
automatically ".prn" although you added ".ar3". Before you use GT-3 File Viewer to print, change the extension to ".ar3"
manually.
There are some cases reported in CorelDRAW 11/12 that outline Colors of curved texts (often by Envelop Effects) are not
fully printed. In those cases, convert the text object into Bitmap before you print or check "Rasterize entire page (DPI)"
checkbox in [ Misc ] tag of [ Print ] menu. Select the resolution by the type of image and file size.
Change RGB=255 bitmap white to RGB=254:
RGB=255 (paper color) white is always transparent with no ink printed. When you print an image like photo, there may be
RGB=255 white spots and they will be ink holes. Follow the steps below to change RGB=255 white to RGB=254 white.
(1) Select [ Effect ("Image" for CorelDRAW 12 or under)] > [ Adjust ] > [ Replace Colors ] menu.
(2) Set RGB=255 white to [ Old color ] and RGB=254 to [ New color ]. Set [ Range ] to [ 1 ] and click "OK".
RGB=255
RGB=254
(3) RGB=255 white are replaced to RGB=254 white.
<Note>
Vector objects should be filled with RGB=254.
4. Printing Directly from Applications
CorelDRAW X3
GT-3 Series
37