Brother GT-341 Instruction Manual page 141

Error
Message
code
3000 PC Communication Error
3001 PC Communication Error
3002 PC Data Error
3003 PC Data Error
3004
3005
PC Data Error
3010
3013
3014
PC Data Error (with White)
3100
PC Data Error (381 mode)
3101
Blank Data
3407
3408 PC Data Error (too large)
3410
3411 PC Data Error
3412
Meaning
GT-3 failed to receive the print data
from the PC.
The PC will not receive the data sent
from GT-3.
GT-3 received the data that is not
supported.
No compatibility of version between the
PC driver and the GT-3 firmware.
USB connection error between PC
and GT-3
GT-341 received the print data with
White print data included.
GT-361 received the print data with 4
White Print Head data included.
GT-3 received blank data, the print
data with no print data included (e.g.
255 white) was made and sent to
GT-3, the image was larger than the
print area and some blank part was
sent to GT-3.
The size of the received print data was
too large.
USB connection error between PC
and GT-3
GT-3 Series
Solution
Check the connection between the PC and GT-3, and
send print data again. If it has no effect, reboot both the
PC and GT-3.
This error occurs when the USB cable is disconnected
during data transmission, or data transmission is
canceled on the PC.
Check the connection between the PC and GT-3, and
retry the PC operation with the GT-3 tools. If it has no
effect, reboot both the PC and GT-3.
This error occurs when the USB cable is disconnected
during data transmission, or GT-3 tools are canceled in
sending data to the PC.
Check the connection between the PC and GT-3, and
send print data again. Or reboot both the PC and GT-3.
GT-3 Firmware is old though the Printer Driver is
upgraded. Confirm the versions and upgrade the
firmware.
Confirm the data (AR3 file and firmware programs ) are
correct. Check the connection between the PC and
GT-3, and send print data again. Or reboot both the PC
and GT-3. These errors may occur when GT-3
malfunctions in improper environment. You can print if no
error is indicated.
Confirm that the Machine Mode is GT-341 by Printer
Driver. GT-341 cannot receive the print data with White
print data included.
Confirm that the Machine Mode is GT-361 by Printer
Driver. GT-361 cannot receive the print data with four
White Print Head data included.
Confirm the print data with GT-3 File Viewer. Confirm the
print area and paper size with e.g. Photoshop Print
Preview.
**
Confirm the data (AR3 file and firmware programs ) are
correct. Check the connection between the PC and
GT-3, and send print data again. Or reboot both the PC
and GT-3. These errors may occur when GT-3
malfunctions in improper environment. You can print if no
error is indicated.
7. Troubleshooting
131