4-4-3. Lowering the Platen height
The Platen height can be lowered by 13 mm by replacing the Bush Platen Shaft and the Platen Positioning Plate to "Platen
Lowering Set" (option). Prepare a hexagon wrench (3 mm).
The adjustable height of the Platen (from the left most position "A" of the original to the bottom)
Original parts:
Platen Lowering Set (option):
(1) Remove the Platen Fixing Lever and uninstall the Platen by lifting it up straight.
(2) Loosen the two hexagon head screws that fix Bush Platen Shaft.
1 - 12 mm
13 - 25 mm
Hexagon head screws
GT-3 Series
4. Printing Directly from Applications
Platen Lowering
Set
Platen
Positioning Plate
0053Y
67