Brother GT-341 Instruction Manual page 132

7. Troubleshooting
(10) Rotate the Lever to fix the Print Head when you fix it as shown below.
(11) Following the steps (18) to (20) in Color Print Head operations to remove the protection film of the Print Head, connect the
Flat Cable to the Carriage PCB and cover the Carriage PCB with the Plastic Cover.
<Important!>
Do not insert the Flat Cable at an angle. The electric current may not be stable and increase the Print Head temperature.
which causes machine errors, mis-firing, and give serious damage to the Print Head. Do not repeat the insertion, or the
terminal (metal) may be damaged and cause serious mis-firing.
(12) Push the Stop Lever to release the lock when you close the Front Cover with both hands.
(13) Turn ON the printer.
(14) Keep the Maintenance Cartridge as inserted and confirm the amount of the Maintenance Solution is left more than 250
ml in the bottle.
(15) Select [ Maintenance ] > [ Initial Cleaning ] from the menu and select the Print Head.
(16) Load the Maintenance Solution first. Replace the Maintenance Cartridge to the well-shaken White Ink Cartridge and then
load the White Ink.
(17) Execute the Normal Cleaning for all the Print Heads so that the surface of the Print Head may be dried.
(18) Print Nozzle Check Pattern to confirm if the replaced Print Head works OK. (See "7-2-3. Checking Print Quality with
Nozzle Check Pattern").
(19) Print the Standard Check Pattern to check the alignment if the Print Head is placed properly. If the Print Heads are not
aligned, then you can see the white ink printed around the color print because the white print area should be printed wider
than the color area. Confirm the position of four (GT-381) or two (GT-361) White Print Heads.
If not aligned, the white print should be
printed wider than the original print data.
(the sample is printed by CMYK ink)
(20) If the quality is OK go on to the next section "7-2-8. Adjustment after the Print Head has been replaced" to complete the
adjustment after the Print Head replacement.
If you still see the problem in print quality, contact your Brother dealer for assistance.
122
GT-3 Series