Error Messages - Brother GT-341 Instruction Manual

7-4. Error Messages

Here is a complete list of error messages that GT-3 shows. Make contact to your dealer or Brother when mark ** is in Solution,
with the information of Error Code No and the message on the Display.
Error
Message
code
1000 (INK LOW Black)
1001 (INK LOW Magenta)
1002 (INK LOW Cyan)
1003 (INK LOW Yellow)
1004 (INK LOW White-1)
1005 (INK LOW White-2)
1006 (INK LOW White-3)
1007 (I INK LOW White-4)
1030 K Head Temp Rising
1031 M Head Temp Rising
1032 C Head Temp Rising
1033 Y Head Temp Rising
1034 W1 Head Temp Rising
1035 W2 Head Temp Rising
1036 W3 Head Temp Rising
1037 W4 Head Temp Rising
1051 CR Motor Life
1060 Temp Low:
1061 Temp High:
1070 Battery Life
1080 RTC not Adjusted
1100 Pump Tube Life
1111 Clean Tube W1
1112 Clean Tube W2
1113 Clean Tube W3
1114 Clean Tube W4
Meaning
Black ink level is too low.
Magenta ink level is too low.
Cyan ink level is too low.
Yellow ink level is too low.
White-1 ink level is too low.
White-2 ink level is too low.
White-3 ink level is too low.
White-4 ink level is too low.
Temperature of Black Print Head is
increasing.
Temperature of Magenta Print Head is
increasing.
Temperature of Cyan Print Head is
increasing.
Temperature of Yellow Print Head is
increasing.
Temperature of White-1 Print Head is
increasing.
Temperature of White-2 Print Head is
increasing.
Temperature of White-3 Print Head is
increasing.
Temperature of White-4 Print Head is
increasing.
The Carriage Motor is worn.
The ambient temperature is below the
range that maintains the print quality.
"xxx" is the current temperature.
The ambient temperature is above the
range that maintains the print quality.
"xxx" is the current temperature.
The battery ran out.
The internal clock has not been set.
Exchange Pump Tube.
W1 needs to do Tube Cleaning.
W2 needs to do Tube Cleaning.
W3 needs to do Tube Cleaning.
W4 needs to do Tube Cleaning.
GT-3 Series
Solution
Prepare a new Black ink cartridge.
Prepare a new Magenta ink cartridge.
Prepare a new Cyan ink cartridge.
Prepare a new Yellow ink cartridge.
Prepare a new White ink cartridge.
Wait with the printer unused, to decrease the
temperature. Confirm if the Flat Cable of the Print Head is
connected properly. Make contact to your dealer or
Brother if the issue is not solved.
**
Raise the room temperature.
Drop the room temperature.
**
**
**
Execute Tube Cleaning W1.
Execute Tube Cleaning W2.
Execute Tube Cleaning W3.
Execute Tube Cleaning W4.
7. Troubleshooting
129