Brother GT-341 Instruction Manual page 140

7. Troubleshooting
Error
Message
code
1200 Exchange Maintenance Parts
1201 Exchange Maintenance Parts
1210 Exhaust Fan Stop
2000 NO INK Black
2001 NO INK Magenta
2002 NO INK Cyan
2003 NO INK Yellow
2004 NO INK White-1
2005 NO INK White-2
2006 NO INK White-3
2007 NO INK White-4
2020 EMPTY Black
2021 EMPTY Magenta
2022 EMPTY Cyan
2023 EMPTY Yellow
2024 EMPTY White-1
2025 EMPTY White-2
2026 EMPTY White-3
2027 EMPTY White-4
2041 No Wiper Cleaner (CMYK)
No Wiper Cleaner (White)
2042
2050 Temp Low
2051 Temp High
Obstacle on the Platen
2070
2100 USB flash drive Not Ready
2101 Not Enough Area
2102 USB flash drive Access Error
No Files
2105
130
Meaning
Needs to exchange the Maintenance
Parts and to clean the printer.
The Fan to exhaust ink mist is stopped. **
Black Ink Cartridge is not installed.
Magenta Ink Cartridge is not installed.
Cyan Ink Cartridge is not installed.
Yellow Ink Cartridge is not installed.
White 1 Ink Cartridge is not installed.
White 2 Ink Cartridge is not installed.
White 3 Ink Cartridge is not installed.
White 4 Ink Cartridge is not installed.
Black Ink Cartridge ran out of ink.
Magenta Ink Cartridge ran out of ink.
Cyan Ink Cartridge ran out of ink.
Yellow Ink Cartridge ran out of ink.
White 1 Ink Cartridge ran out of ink.
White 2 Ink Cartridge ran out of ink.
White 3 Ink Cartridge ran out of ink.
White 4 Ink Cartridge ran out of ink.
The Wiper Cleaner for CMYK is not
installed.
The Wiper Cleaner or White is not
installed.
The ambient temperature is under the
operative temperature rage.
The ambient temperature is over
operative temperature rage.
The Clearance Sensor detected an
obstacle on the Platen (or the media) in
loading the Platen.
USB flash drive is not properly
mounted.
The USB flash drive does not have
enough area for saving.
The mounted USB flash drive is out of
support, or USB flash drive is broken.
No available data in the USB flash
drive.
GT-3 Series
Solution
Exchange the Maintenance Parts and clean the inside of
the printer. See "6-1. Replacing Consumables".
Install a Black Ink Cartridge.
Install a Magenta Ink Cartridge.
Install a Cyan Ink Cartridge.
Install a Yellow Ink Cartridge.
Install a White Ink Cartridge.
Replace to a new Black Cartridge.
Replace to a new Magenta Cartridge.
Replace to a new Cyan Cartridge.
Replace to a new Yellow Cartridge.
Replace to a new White Cartridge.
Install the Wiper Cleaner to the CMYK side.
Install the Wiper Cleaner to the White side
Raise the room temperature.
Drop the room temperature.
Remove the obstacle, flat the platen surface and then
press OK Button.
Re-mount the USB flash drive. Confirm the spec and
type of the USB flash drive. See " 7-1. Solving Printer
Problems".
Check the free space of the USB flash drive with PC.
Mount a USB flash drive with free area available.
Check the spec and type of the USB flash drive. See "
7-1. Solving Printer Problems".
Check the free space of the USB flash drive with PC.