Uninstall Instructions - US Robotics 56K FAXMODEM USB - INSTALLATION GUIDE FOR WINDOWS REV 1.1 Installation Manual

Step 1: Uninstall the modem drivers using the Add/Remove Programs.
Windows 98SE
Click Windows Start, Settings, and Control Panel. Double-click Add/Remove
Programs. Click the Install/Uninstall tab. Select U.S. Robotics 56K Faxmodem
USB and click Remove.
Windows Me
Click Windows Start, Settings, and Control Panel. Double-click Add/Remove
Programs. Click the Install/Uninstall tab. Select U.S. Robotics USB Modem
Enumerator and click Remove.
Windows 2000
Click Windows Start, Settings, and Control Panel. Double-click Add/Remove
Hardware. Click Next to continue. Select Uninstall/Unplug a device and click Next.
Select Uninstall a device and click Next. Scroll down the list of installed hardware
and highlight U.S. Robotics 56K Faxmodem USB and click Next. Select Yes, I want
to uninstall this device and click Next. When Windows reports successful uninstall,
click Finish.
Step 2: Physically disconnect the modem from the computer.
Disconnect the USB A to B cable from the modem and the computer. Your modem will now
be uninstalled.
NOTE: For troubleshooting help or to find out how to contact technical support, see the
"Troubleshooting" and "Support Resources" sections in the following pages.
U I
NINSTALL NSTRUCTIONS
6