Line Constructed From A Rectangle; Line Constructed From Multiple Features - HEIDENHAIN ND 1300 Operating Instructions Manual

Line constructed from a rectangle

The line feature will be constructed from the radius center at one end of
the rectangle to the radius center at the other end.
To construct a line from a slot:
1 Touch the Measure Line icon
2 Touch the rectangle feature
3 Press the Enter key
4 Press the Finish key
The center line of the rectangle will be constructed.

Line constructed from multiple features

The best fit line through the center of multiple features can be con-
structed from any combination and any number of points, slots, circles,
and arcs.
To construct a line from multiple features:
1 Touch the Measure Line icon
2 Touch a feature
3 Press the Enter key
4 Repeat steps 2 and 3 for all features
5 Press the Finish key
The best fit line through the entire collection of features will be constructed.
Constructing Features
97