Check drive security in the IPMI web interface
Before you begin
You have configured the IPMI port. See Configure the IPMI port for remote management on page 28.
Procedure
1. Select Storage > Physical Disks and review the Security Status column.
2. Select Storage > Virtual Disks and review the Secured column.
Create a Security Key
Before you begin
You have displayed the PERC BIOS Configuration Utlity on the computer connected to the OmniCube
host. See Access the PERC BIOS Configuration Utility on page 32.
Procedure
1. Select the PERC H730P Mini controller on the Virtual Disk Management screen.
2. Press F2.
3. Select Security Key Management > Create Key.
34
Check drive security in the IPMI web interface