System Requirements; Product Setup - D-Link DCS-2330L Quick Installation Manual

SYSTEm rEQuIrEmENTS

• Computer with Microsoft Windows
• PC with 1.3GHz or above and at least 128MB RAM
• Internet Explorer 7, Firefox 12, Safari 4, or Chrome 20 or higher version with Java installed and
enabled
• Existing 10/100 Ethernet-based network or 802.11g/n wireless network

PrODuCT SETuP

WINDOWS USER
Step 1:
Carefully remove the rubber seal on the back of the DCS-2330L, and use the included Ethernet
cable to connect the DCS-2330L to your network.
Step 2:
Connect the external power supply to a power outlet. Wait until the power LED turns green.
Step 3:
Insert the Installation CD into your CD-ROM drive. If the Setup Wizard does not automatically run, go
to Start > Run, and type in D:\autorun.exe (where D: represents the letter of your CD-ROM drive)
and click OK. When the Setup Wizard appears, click Set up your Cloud Camera and follow the on-
screen instructions.
Step 4:
After configuring your DCS-2330L, you can remove the Ethernet cable and carefully reinsert the
rubber seal.
4
®
8/7/Vista/XP, or Mac with OS X 10.6 or higher
DCS-2330L