LaCie 5big Backup Server
Configuration Guide
2.2. Connecting the Ethernet Cable
The 5big Backup Server is accessible when attached to your network
(Fig.
07). The USB 2.0 and eSATA ports are for expansion only and
should not be used to connect the 5big Backup Server to a com-
puter.
1. Connect the Ethernet cable to the Ethernet port on the back of
the LaCie 5big Backup Server
2. Connect the other end of the Ethernet cable into an available
Ethernet port on your router.
3. Turn the server on if it is off. See
Backup
Server.
TECHNICAL INFORMATION:
ceive its IP address from a DHCP server.
(1.4.2. Rear
View).
2.1. Turning On the 5big
The 5big Backup Server must re-
Setting Up Your LaCie 5big Backup Server
DESIGNED BY NEIL POULTON
LAN 1
AUDIO OUT
USB
USB
USB
POWER
eSATA
Fig. 07
page 14