5Big Backup Server Recovery - LaCie 5big Backup Server Configuration Manual

LaCie 5big Backup Server
Configuration Guide
7.1.2.

5big Backup Server Recovery

IMPORTANT INFO: As with most recovery operations, LaCie can-
not guarantee that all files and settings will be restored. There is
a very good chance that certain system settings, such as user and
computer profiles, will have to be recreated. Add-in programs must
be reinstalled after a recovery.
1. Make certain that all users and computers have logged off from
the 5big Backup Server on the local network and, if applicable,
from remote locations.
2. Turn off the 5big Backup Server by selecting Settings in the Con-
sole (Fig. 82, a), followed by Shut Down
3. Once the 5big Backup Server has shut down, plug the USB 2.0
flash key into one of its four USB 2.0 ports
4. To boot the 5big Backup Server in recovery mode:
✦ Insert the pointed end of the drive lock tool into the system
recovery button (1.4.2. Rear
✦ While pushing the system recovery button, turn on the 5big
Backup Server by pushing the front LED button.
✦ Continue to push the system recovery button for two or three
seconds.
5. The front LED blinks at a slower pace, indicating that it is boot-
ing from the recovery USB 2.0 flash drive.
6. Insert the 5big Backup Server Recovery DVD into a Windows
workstation's optical disk drive. The workstation must be con-
nected to the same network as the 5big Backup Server.
7. Go to Server Recovery DVD > Applications > Server Recovery.
Launch Server Recovery.
8. Read the welcome page then click Next>
9. The Server Recovery will search for the 5big Backup Server on
the network. Once it is found, click Next>
Backup Server is not found, please make certain that:
✦ The workstation and the 5big Backup Server are on the same
network.
✦ The 5big Backup Server has booted from the USB recovery
key.
(Fig. 82, b).
(1.4.2. Rear
View).
(Fig. 83).
(Fig. 84). If the 5big
continued on the next page>>
Fig. 82
View).
Fig. 83
Fig. 84
b
Recovery
page 46
a