Pc Recovery (Windows Workstations Only) - LaCie 5big Backup Server Configuration Manual

LaCie 5big Backup Server
Configuration Guide
7.2.3. PC Recovery (Windows Workstations
Only)
IMPORTANT INFO: The 5big Backup Server must have at least
one backup of the workstation being recovered. The recovery op-
eration cannot succeed if the workstation has not been backed up
by the 5big Backup Server.
In the event of workstation error or failure, the 5big Backup Server
can help you restore the system to a previous, working state. Before
starting a Windows recovery, it is highly recommended that you have
all the tools at your disposal:
✦ The PC Recovery CD (included) or a PC Recovery USB 2.0
flash drive (7.2.2. PC Recovery USB 2.0 Flash Drive (Option-
al))
✦ The workstation drivers stored on the 5big Backup Server. The
drivers should be copied to a USB 2.0 flash drive. See
Workstation Drivers and File Recovery
1. Make certain that the computer being recovered is connected to
the same network as the 5big Backup Server.
2. Insert the PC Recovery CD into your workstation's optical disk
drive. The workstation must boot from the CD. If the workstation
being recovered does not include an optical disk drive, use a PC
recovery USB 2.0 flash drive. See
Flash Drive (Optional).
3. Once the computer starts from the CD or USB 2.0 flash drive,
the recovery program will lead you through each step
4. Choose your country and keyboard
5. If the Detect Hardware window includes one or more network
devices, click Continue and skip to step 13.
7.2.2. PC Recovery USB 2.0
(Fig.
(Fig. 99). Click Continue.
(Fig. 100)
continued on the next page>>
Fig. 98
7.2.1.
98).
Fig. 99
Fig. 100
Recovery
page 52