Adding A New Disk To The 5Big Backup Server Storage - LaCie 5big Backup Server Configuration Manual

LaCie 5big Backup Server
Configuration Guide
6.2. Adding a new disk to the 5big
Backup Server storage
1. Once the new drive is installed, select Server Storage in the
Console.
2. The new drive will be listed under Non Storage Hard Drives.
Click once on your new drive so that the +Add selection be-
comes active (Fig. 73).
3. Click once on +Add to launch the Add a Hard Drive Wizard
(Fig. 74).
4. Follow the Wizard to include the new drive in the pool of Stor-
age Hard Drives.
5. Once finished, the new hard drive should be listed under the
section Storage Hard Drives (Fig. 75).
Fig. 73
Fig. 74
Fig. 75
Disk Installation
page 42