LaCie 301161U - Ethernet Disk RAID NAS Server User Manual page 97

LaCie Ethernet Disk RAID
User Manual
8. If you ever need to recover your disk using the re-
covery CD or remotely boot from a backup on the
Ethernet Disk RAID, you'll be prompted for a pass-
word. In the Recovery password
password that you'd like to use, enter it again in the
Retype your password
See Fig. 7.2.F.
TeChNICAl NOTe:
The recovery password must be 12–16 characters
❖
long.
The same password is used for all disks backed
❖
up to the same Ethernet Disk RAID. If you sub-
sequently protect a second disk using the same
Ethernet Disk RAID, you will not be prompted
to provide this password again. However, if you
protect a second disk using a different Ethernet
Disk RAID, you will be prompted to provide a
password for that Ethernet Disk RAID.
You can change this password later using Win-
❖
dows Backup Software and using the Ethernet
Disk RAID.
9. Review all your selections and click Finish. See Fig.
7.2.G.
If you selected the
begins as soon as you click v, and you can review its
progress on the Status page in Client Backup and
Recovery. If you want to protect additional disks or
partitions, repeat this procedure for each one.
ImpOrTANT INfO:
change the drive letter of a protected disk or par-
tition, you must restart Windows Backup Soft-
ware to update this application.
(Firmware version 1.4)
text box, enter the
text box, and then click Next.
Back up now check box, backup
If you subsequently
Protecting Local Disks
Fig. 7.2.F
Fig. 7.2.G
page