LaCie 301161U - Ethernet Disk RAID NAS Server User Manual page 64

LaCie Ethernet Disk RAID
User Manual
Network Settings Options
■
To change this
The packet size for transferring
data
The FTP settings
4. Click Apply.
5. When the confirmation message appears, click OK.
(Firmware version 1.4)
Do this
Specify whether or not to transfer larger data packets between the
Ethernet Disk RAID and the computers in your network by selecting
or clearing the
Ethernet Disk RAID will use 1514-byte packets.
If you select this option, you can specify a larger packet size (from 1514
to 9014 bytes).
TeChNICAl NOTe:
more quickly. However, you can select this option only if your net-
work, Ethernet switch, and the network interface cards (NICs) on
the computers in your network support the specified packet size. To
determine whether you can use jumbo frames, refer to the documen-
tation for those components.
If you want to use the Ethernet Disk RAID as an FTP server, select
the Enable FTP server
FTP server, clear this option.
For information about accessing the Ethernet Disk RAID using FTP,
refer to section
Managing Your Ethernet Disk RAID
Jumbo Frames check box. If you clear this option, the
Using jumbo frames allows you to transfer data
check box. If you do not want to use it as an
5.2. Accessing Shared Folders Using
TeChNICAl NOTe:
address of the Ethernet Disk RAID, you must
now access the Manager using the new IP ad-
dress.
page 
FTP.
If you changed the IP