LaCie 301161U - Ethernet Disk RAID NAS Server User Manual page 42

Network raid storage system
Table of Contents

Advertisement

LaCie Ethernet Disk RAID
User Manual
10.
In the Password text box, enter the password associ-
ated with the specified user name.
11.
If your Active Directory tree has more than 100 sub-
units or more than 64 users or groups, or if you want
to specify the name of the organizational unit that
contains the users and groups that will be able to ac-
cess shared folders on the storage system, enter the
name of organizational unit in the Organizational
unit name text box. The name must be preceded by
a forward slash (as in /Sales). The Active Directory
Tree page displays. See figure 5.4.5.1.D.
If you omit an organizational unit name here, you
can browse the Active Directory tree on the next
page. However, if the tree has more than 100 sub-
units or more than 128 users or groups, an error mes-
sage displays, and you must specify an organizational
unit name.
12.
Select the organizational units that contain the users
or groups that are allowed to access the shared fold-
ers on the storage system, and then click Next.
The Active Directory Administrator Login page dis-
plays. See figure 5.4.5.1.E.
TeChNICAl NOTe:
selection(s) carefully. You can select the root of all the organizational units to get a listing of every user in every
unit. If you do setup a organizational unit and need to change it, you can switch to local mode and then re-join the
domain. However, this requires setting up the user rights to all shared folders again.
You must select at least one organizational unit. Selecting the forward slash mark (/) selects everyone in the tree.
As you select units in the list, the Number of selected users and Number of selected groups areas display the
number of users and groups that will be added to the storage system. The maximum allowed number of users is
128, and the maximum allowed number of groups is 128. If your selection exceeds these maximums, you must
select a different unit.
(Firmware version 1.4)
Once the organizational units are entered, you cannot change them so make your
Managing Your Ethernet Disk RAID
TeChNICAl NOTe:
The name of the organi-
zational unit cannot contain a slash. For example,
if the name is Sales/Marketing, you must either
specify a different organizational unit name, leave
the name blank, or change the name of the orga-
nizational unit on the Active Directory server.
Fig. 5.4.5.1.D
Fig. 5.4.5.1.E
page 

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents