LaCie 301161U - Ethernet Disk RAID NAS Server User Manual page 45

LaCie Ethernet Disk RAID
User Manual
3. Make the desired changes, if any, and click Apply:
To change this
The IP address of the primary
Active Directory server
The IP address of the secondary
Active Directory server
The user name or password for
browsing the Active Directory
tree
4. To immediately synchronize the storage system and
the Active Directory server, click Synchronize Now.
(Firmware version 1.4)
Do this
In the Primary server IP address text box, enter the IP address of your primary Ac-
tive Directory server. (You cannot use the server's name.)
NOTe: The new server must reside in the same domain as the original server. To
change domains, you must change the authentication mode (see section
Changing Authentication
In the Secondary server IP address text box, enter the IP address of your secondary
Active Directory server. (You cannot use the server's name.)
NOTe: The secondary server must reside in the same domain
as the primary server.
In the User name text box, enter the name of a user who has privileges to access the
Active Directory tree.
In the Password text box, enter the password associated with that user name.
This user name and password will be used to obtain new user and group information
from the Active Directory server at every synchronization.
Managing Your Ethernet Disk RAID
Mode).
TeChNICAl NOTe:
age system and the Active Directory server differ
by more than five minutes, errors will occur when
the two systems synchronize. It is recommended
that you configure both the storage system and
the Active Directory server to set their clocks
from a common Network Time Protocol (NTP)
server.
page 
5.4.5.1,
If the clocks of the stor-